Hi Hiroshi,
I have a problem with "Show ion table" function.
I am not able to use it in some projects. Let's say I have ~800 peaks spots (Blank+, MS2 acquired+, Suggested+) that I need to review.
When I click on the icon, the progress bar "Progress of preparing alignment spot table viewer" stops at random position and never reaches the end. Sometimes is freezes at ~20%, sometimes at ~80%. I can use the X to close the bar and try again.
HW resources are available.
If I completely rebuild the project, it helps sometimes, but sometimes it freezes again. True for multiple versions of MS-DIAL.
Could you please suggest how to find what is wrong?
Thank you,
O.
Had the same, especially with big ion tables.
Often it helps to cancel ion table building and simply start it again.
Hi Sergey and Ondrej:
Could you please evaluate this?
https://briefcase.riken.jp/public/q9RkQA4nMghAP1w
If good, I will upload it on public repository.
Thanks!
Hiroshi
Sorry sorry, please evaluate the following version.
https://briefcase.riken.jp/public/U9ocQA8nHYhApXQ
Hiroshi
Hi Hiroshi,
thank you. It works now.
Tested on two different projects, 25k and 35k peak spots from 350 samples.
The bar grows slowly and then jumps several times till 100%.
Ondrej