Skip to main content

Show Posts

This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.

Messages - genefisher

2
R / Re: Looking for help: Dimensions of profile matrices do not match !
Hi Jan,

When I type xset1, it shows as follow:

An "xcmsSet" object with 1356 samples

Time range: 2.1-1502.6 seconds (0-25 minutes)
Mass range: 81.5189-1399.7288 m/z
Peaks: 4316671 (about 3183 per sample)
Peak Groups: 5144
Sample classes: Mixed

Feature detection:
 o Peak picking performed on MS1.
Profile settings: method = bin
                  step = 0.1

Memory usage: 410 MB

Do you know what the problem is?

Many thanks
3
R / Re: Looking for help: Dimensions of profile matrices do not match !
I use density method to analyze the data, It shows error:

> xset1 <- group(xset, method="density", minfrac=0.1, minsamp=1, bw=10,
+                mzwid=0.01, sleep=0.001)
Processing 263643 mz slices ... OK
> xset2 <- retcor(xset1, family= "s", plottype= "m", missing=1, extra=1,
+                 span=1)
Error in do_adjustRtime_peakGroups(peaks = peakmat, peakIndex = object@groupidx,  :
  No peak groups found in the data for the provided settings
> xset3 <- group(xset2, method="density", mzwid=0.01, sleep=0.001,
+                minfrac=0.1, minsamp=1, bw=5)
Error in group(xset2, method = "density", mzwid = 0.01, sleep = 0.001,  :
  object 'xset2' not found
> xset4 <- fillPeaks(xset3)
Error in fillPeaks(xset3) : object 'xset3' not found
> an <- xsAnnotate(xset4)
Error in xsAnnotate(xset4) : object 'xset4' not found
> anF <- groupFWHM(an, perfwhm = 0.6)
Error in groupFWHM(an, perfwhm = 0.6) : object 'an' not found
> anI <- findIsotopes(anF, mzabs=0.01)
Error in findIsotopes(anF, mzabs = 0.01) : object 'anF' not found
> anIC <- groupCorr(anI, cor_eic_th=0.75)
Error in groupCorr(anI, cor_eic_th = 0.75) : object 'anI' not found
> anFA <- findAdducts(anIC, polarity="positive")
Error in findAdducts(anIC, polarity = "positive") :
  object 'anIC' not found
> write.csv(getPeaklist(anFA), file="data.csv")
Error in getPeaklist(anFA) : object 'anFA' not found
4
R / Re: Looking for help: Dimensions of profile matrices do not match !
Thank you, Jan.

Yes, I have try both:
xset2 <- retcor(xset1, family= "s", plottype= "m", missing=1, extra=1,
span=1)
xset2<-retcor(xset1,method="obiwarp",profStep=0.1,plottype="deviation")

The XC MS shows the same error.
Error in .local(object, ...) :
  Dimensions of profile matrices do not match !
Do I need to change some parameters to try it?

Many thanks
5
R / Re: Looking for help: Dimensions of profile matrices do not match !
Many thanks for your reply, Jan.
Yes, I use orbiwarp, I use both of rector and orbiwarp to try it, but it does`s works.
Here is my R script, could you please help me to check what is the probelm?
library (xcms)
library (CAMERA)
xset <- xcmsSet(method="centWave", ppm=20, snthresh=10, peakwidth=c(5,18))
xset1 <- group(xset, method="density", minfrac=0.1, minsamp=1, bw=10,
mzwid=0.01, sleep=0.001)
#xset2 <- retcor(xset1, family= "s", plottype= "m", missing=1, extra=1,
span=1)
xset2<-retcor(xset1,method="obiwarp",profStep=0.1,plottype="deviation")
xset3 <- group(xset2, method="density", mzwid=0.01, sleep=0.001,
minfrac=0.1, minsamp=1, bw=5)
xset4 <- fillPeaks(xset3)
an <- xsAnnotate(xset4)
anF <- groupFWHM(an, perfwhm = 0.6)
anI <- findIsotopes(anF, mzabs=0.01)
anIC <- groupCorr(anI, cor_eic_th=0.75)
anFA <- findAdducts(anIC, polarity="positive")
write.csv(getPeaklist(anFA), file="data.csv")

Many thanks
6
R / Looking for help: Dimensions of profile matrices do not match !
Hey Everyone,

I met very strange problem, I can not fix by myself now. I am urgently looking for help.

I divided my samples(650 samples) into two sub groups named mock and treatment and then put them into one folder to run XCMS.

When I run mock(325 samples) independently, the XC MS runs well and it works fine for me.

When I run treatment(325 samples) independently, the the XC MS also .runs well.

However, when I run mock and treatment samples(650 samples) together, the XC MS shows error as follows:

Control0h_L1-50_BD7_01_38715  Create profile matrix with method 'bin' and step 0.1 ... OK
Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-51_BE7_01_38716  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-52_BF7_01_38717  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-53_BG7_01_38718  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-54_BH7_01_38719  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-55_BA8_01_38720  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-56_BB8_01_38721  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-57_BC8_01_38722  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-58_BD8_01_38723  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-59_BE8_01_38724  Create profile matrix with method 'bin' and step 0.1 ... OK
Control0h_L1-6_BG1_01_38666  Create profile matrix with method 'bin' and step 0.1 ... OK
Found gaps: cut scantime-vector at  1399.01 seconds
Control0h_L1-60_BF8_01_38725  Create profile matrix with method 'bin' and step 0.1 ... OK
Error in .local(object, ...) :
  Dimensions of profile matrices do not match !

> xset3 <- group(xset2, method="density", mzwid=0.01, sleep=0.001,
+                minfrac=0.1, minsamp=1, bw=5)
Error in group(xset2, method = "density", mzwid = 0.01, sleep = 0.001,  :
  object 'xset2' not found

> xset4 <- fillPeaks(xset3)
Error in fillPeaks(xset3) : object 'xset3' not found
> an <- xsAnnotate(xset4)
Error in xsAnnotate(xset4) : object 'xset4' not found
> anF <- groupFWHM(an, perfwhm = 0.6)
Error in groupFWHM(an, perfwhm = 0.6) : object 'an' not found
> anI <- findIsotopes(anF, mzabs=0.01)
Error in findIsotopes(anF, mzabs = 0.01) : object 'anF' not found
> anIC <- groupCorr(anI, cor_eic_th=0.75)
Error in groupCorr(anI, cor_eic_th = 0.75) : object 'anI' not found
> anFA <- findAdducts(anIC, polarity="positive")
Error in findAdducts(anIC, polarity = "positive") :
  object 'anIC' not found
> write.csv(getPeaklist(anFA), file="data.csv")
Error in getPeaklist(anFA) : object 'anFA' not found



Many thanks for you inadvance!

Have a nice weekend.
7
R / Help on PCA: Error in colMeans(x, na.rm = TRUE) : 'x' must be numeric
Hi,
Any body knows how to solve this R PCA problem? I`ve try many times, I still don`t know the reason. I hope somebody could help me
When I type:
> dtp<-prcomp(tdt,retx= TRUE,center= TRUE,scale= TRUE)
Error in colMeans(x, na.rm = TRUE) : 'x' must be numeric

Thanks in advance for all your help.
9
XCMS - FAQ / Error in do_adjustRtime_peakGroups(peaks = peakmat, peakIndex = object@groupidx,
Hey,
Anybody knows how to solve this problem with XC-MS? It shows:
> xset2 <- retcor(xset1, family= "s", plottype= "m", missing=1, extra=1,
+ span=1)
Performing retention time correction using 2 peak groups.
Error in do_adjustRtime_peakGroups(peaks = peakmat, peakIndex = object@groupidx,  :
  Not enough peak groups even for linear smoothing available!
In addition: Warning message:
In do_adjustRtime_peakGroups(peaks = peakmat, peakIndex = object@groupidx,  :
  Too few peak groups for 'loess', reverting to linear method


Many thanks!

Yuechen