Print Page - MRMPROBS 2.50 max integer problem

Title: MRMPROBS 2.50 max integer problem
Post by: Ondrej on October 16, 2020, 02:17:07 AM

Hi Hiroshi,
I found a problem in MRMPROBS 2.50 when the peak is very high.
With some peaks, we reach the limit of 32-bit integer (ranges from -2,147,483,648 to +2,147,483,647).
I see the peak height well, but when I change the info to peak area, I get a negative value.
Thus, when exported as raw matrix, I get zero values.
Could you please change it to 64 bit integer? Thank you.
Ondrej

Title: Re: MRMPROBS 2.50 max integer problem
Post by: Hiroshi Tsugawa on October 30, 2020, 08:15:41 PM

As privately sent to you, this issue was fixed and the new version will be uploaded next week.

Hiroshi

Title: Re: MRMPROBS 2.50 max integer problem
Post by: Hiroshi Tsugawa on November 01, 2020, 07:32:39 AM

Now, it is available online.
http://www.metabolomics-forum.com/index.php?topic=1576.0
Thanks,

Hiroshi

Metabolomics Society Forum

Software => MS-DIAL => Topic started by: Ondrej on October 16, 2020, 02:17:07 AM