Metabolomics Society Forum

Software => MS-DIAL => Topic started by: Manish Kumar on April 14, 2022, 06:01:42 AM

Title: Error in sample processing in MS DIAL
Post by: Manish Kumar on April 14, 2022, 06:01:42 AM
what could be the possible reason for skipping the sample processing as shown in attached image. I repeated it with different  set of samples, found the same result. Also, what to do next when its stuck at this level?
Title: Re: Error in sample processing in MS DIAL
Post by: Manish Kumar on April 14, 2022, 06:13:53 AM
The sample processing panel is stuck as shown in attached figure for infinite time. What could be done to avoid this and not doing everything again from scratch.
Title: Re: Error in sample processing in MS DIAL
Post by: triston.groff on April 14, 2022, 04:49:16 PM
Do not have an answer for you, but this also happens to me. Sometimes if I re-convert the files (even if I know there is nothing wrong with the file based on viewing in SeeMS), or use less threads, I do not have the issue.
Title: Re: Error in sample processing in MS DIAL
Post by: Manish Kumar on April 15, 2022, 12:11:05 AM
Do not have an answer for you, but this also happens to me. Sometimes if I re-convert the files (even if I know there is nothing wrong with the file based on viewing in SeeMS), or use less threads, I do not have the issue.

Hi Triston,

Thank you for your reply. I have tried doing same as suggested by you and also changing the sequence of samples in the list for processing but still got stuck at same place (screenshot attached).

@Hiroshi Tsugawa and @MS DIAL TEAM
I believe that, a skip button to go to next step bypassing those unprocessed sample will be helpful in such case. Looking forward to get this feature in coming updates.