Skip to main content
Topic: Show ion table (Read 155 times) previous topic - next topic

Show ion table

Hi Hiroshi,
I have a problem with "Show ion table" function.
I am not able to use it in some projects. Let's say I have ~800 peaks spots (Blank+, MS2 acquired+, Suggested+) that I need to review.
When I click on the icon, the progress bar "Progress of preparing alignment spot table viewer" stops at random position and never reaches the end. Sometimes is freezes at ~20%, sometimes at ~80%. I can use the X to close the bar and try again.
HW resources are available.
If I completely rebuild the project, it helps sometimes, but sometimes it freezes again. True for multiple versions of MS-DIAL.
Could you please suggest how to find what is wrong?
Thank you,
O.

Re: Show ion table

Reply #1
Had the same, especially with big ion tables.

Often it helps to cancel ion table building and simply start it again.



Re: Show ion table

Reply #4
Hi Hiroshi,
thank you. It works now.
Tested on two different projects, 25k and 35k peak spots from 350 samples.
The bar grows slowly and then jumps several times till 100%.
Ondrej